Streak-Free Windows: Use the AquaWiper™ Like a Pro

Quick summary: Tired of cleaning windows only to find streaks left behind? With the right technique and the AquaWiper™, you can achieve sparkling, crystal-clear glass every time — without wasting hours.

Why windows get streaks after cleaning

Most streaks happen because of three common mistakes: using the wrong cloth, cleaning in direct sunlight, or using too much solution. The heat makes liquid dry too fast, leaving streak marks behind.

5 Pro Tips for Streak-Free Windows

1. Clean on a cloudy day: Avoid direct sun to stop the cleaner from drying too quickly.
2. Use less cleaning solution: A light mist is enough — too much liquid leaves streaks.
3. Wipe top to bottom: Gravity pulls liquid down, so work with it instead of against it.
4. Use a squeegee or AquaWiper™: Cloths often smear; a professional tool removes water evenly in one pass.
5. Finish with a microfiber cloth: Wipe edges or corners where water might collect.

How AquaWiper™ makes window cleaning effortless

• Dual-edge design: Scrubs dirt on one side, wipes clean with the other.
• No streaks: Even pressure across the glass for a flawless finish.
• Time-saving: Clean large windows, mirrors, and shower glass in minutes.
• Eco-friendly: Works with just water or a mild cleaner — no need for harsh chemicals.

Step-by-step: Using AquaWiper™ like a pro

1. Spray window lightly with water or mild cleaner.
2. Use the AquaWiper™ scrubbing side to loosen dirt.
3. Flip to the wiper edge and glide top to bottom in one smooth motion.
4. Wipe the blade with a microfiber cloth between passes.

Other surfaces AquaWiper™ works on

It’s not just for windows — use AquaWiper™ on mirrors, shower doors, car windows, or any glass surface that needs a streak-free shine.

Ready to make streaks a thing of the past? Get your AquaWiper™ here and enjoy spotless glass in minutes.

FAQ

Q: Do I need special cleaning products with AquaWiper™?

A: No — water alone works well. For tough spots, use a mild glass cleaner.

Q: Can AquaWiper™ be used on shower glass?

A: Yes — it’s perfect for preventing soap scum and water spots in showers.

Q: How often should I replace AquaWiper™?

A: With normal use, it lasts for months. Just rinse and dry after each use.